Видео

Hope uour doing well have not seen any videos in a few years as a content creator it was enjoyable to watch

Just put a 5 on it,it balance it good and used on a job and no flaws

Thank you

Why do you need to remove the cap? Can’t you just pop out the top long pin? Or does the bottom cap holding the long top pin somehow?

That Looks fantastic. Thank you for sharing this with us.

I totally agree with the need for level on table saws! Just got a harvey big eye 3hp. This is perfect and i have used those levelers on other tables! Thank you for the great video!

Thanks to you. Great video 👍

Excellent video. Straight to the point. Thanks

Don't think you overreacted I would have done the same thing and to be honest I'm about to buy a table saw and I was looking at the Harvey hw110lc unit I found out they are made in China they used to be made in Taiwan and I've seen the cast iron tops and the grinding marks on the side of the table it was shoking to see and it didn't look as good what I seen so I'll pass for Harvey

Thank you! You saved me money! CHA-CHING I'm glad I found your video.

Thank you for this interesting review.

Maglite? Bro you’re delusional. you fell way behind. I own over 15 different brands of flashlights and mag light is not one of them

Thank you sir for guiding me much appreciate it

Excellent video!

A little trick I do when starting a hole saw cut, I run the saw backwards to score the hole. On very thin material I cut the hole in the reverse all the way through, such as the backs of bathroom vanities. Same with cheap hollow core doors.

I like that vacuum

16:36 16:42 ha ha, Clever racist double entendre

Either terrible luck or old person bias. Owned many olights and currently use a marauder mini never had a problem with any of them. But stopped buying olight because of the proprietary batteries all their lights started to use. Still love Maglite and use them on the daily too. Incan Minimag candle mode is the best. If you haven’t been to the maglite site in a while they do still sell the Incan minimags and their replacement bulbs. Anyhoo my grandad grew up in the age where china made mostly cheap low quality products. So my grandad always swore he’d only buy American, Japanese, or German products. Even till the day he died he never knowingly bought anything made in china.

Don't know how I missed this when it first posted. Nice review. We appreciate it. The first version wasn't drilled for Milwaukee. We made a rolling change to include it and the plates started going through assembly before word came down to throw away the old manuals, so a few...including yours...fit Milwaukee but didn't have proper documentation. That's been resolved for months now. On centering your base, you made it harder on yourself than necessary. The cone at the end of the centering pin will make the job easier. With the base loose, adjust the depth of cut until the taper fits into the guide bushing. The taper will force the base to perfect center. Lock it up and go.

Does this work for 6 1/2 inch saws as well?

Outstanding video, Thanks it has been a great help.

Incredibly useful video. Saying thanks and giving a thumbs up doesn’t seem enough, but it’s all I’ve got to give. Thanks!

That beutiful Woodpecker red solid machined-aluminum table is now made of black phenolic. 5/23/2024

Thank you!!

What size socket do you use for the plug?

Can you cut the bottom of a wine bottles off? Thank you

Love it.

👌🏻

I have a project I'm going back to fix because Granite Grip is pealing up at the edges on a concrete patio. This was a raw concrete application. When I first applied Granite Grip..I had to call Behr because I kept getting streaking from rollers. They told me to rent a texture sprayer. They did reimburse me for the rental and 12 gallons of extra product. However..fast forward to 11 months later and I am going to the same project to scrape up the edges and I have to re-spray! I'm not a happy camper about this

I really enjoy your video showing how to do the water Faciane replacement. I’ve used it a couple of times now. Thanks for the tips. One more question. Do you know where I can purchase replacement for the stage four and stage five maybe on a website local dealer I used to use is out of business, Delon Fields

Would be a better presentation if you don’t repeat yourself several times on various subjects. Also would be good to make an outline before recording.

Sadly, China can and does produce better and higher quality flashlights with better form and function than the United States does and at a much cheaper price. I dont own any Olights because I’m not a fan of battery system they have. But at the end of the day. If we want to see better and actually affordable stuff come from the United States. Stop paying taxes and supporting corrupt politicians in tyrannical police forces. Only then will we see true growth in the economy and the average standard of living go up.

YOU DID NOT SHOW “HOW “ YOU SHOWED JUST THE RESULT OF IT , NOT HELPFUL AT ALL

If Mag Lights are good for the military then they should be a must for every homeowner and professional.

What color did you use

It’’s SO refreshing to see someone that has the same problems that I do, you have more patience tho. It’s also nice to have the right tools for the job!

That's a scary approach. It's much easier to simply set the saw on the mobile base first, without the bolts in-place, and then line up the mounting holes with the corner holes in the mobile base. They line right up. That's why they say to add a 1/2" all around, and not a 1/4". Then slide some 3" long bolts through and tighten. Done. No dangerous balancing act required. You have to supply your own 3" bolts, as I think they intend for you to just use the heavy rubber feet without thru-bolting it. cheers

4/23/24

So glad I found you 😅 You are my absolute hero!!!

Worth watchin it!

I don't own an incra box joint jig but I have done projects woodworking where i either tweaked the box from clamping too tight or different expansion properties of 2 different types of wood, i.e. 1x stock & plywood or mdf or similar or heck even 2 different wood species .... its always so frustrating and always happens most when you are on a tight timeline ... good ol murphy lol

hiisvt sisne ni nii?.. thanks

Clear, concise & friendly instructions. This fellow is a true"handyman"! Even I can do these tasks now. Thanks.

Excellent video. Thanks!

No need to talk smack about who or what was done prior to you doing your job

What model was the Dewalt driver?

Now, this is how an American man should talk. God bless you and yours. Hope your move went smoothly.

Plan on buying a carburetor for this mower after a year or two..About 14.00 on Ebay..If your mower won't start spray some starter or carburetor cleaner in the carburetor..If it runs for about 10 seconds or longer and quits it is the carburetor...

It looks symmetrical. Will it work with a saw with the blade on the opposite side of the saw body? (i.e. Milwaukee M-12 Fuel 5-3/8 inch saw)

Rick, Hope all is well? Curious if Harvey did provide you with a Big Eye Rip Fence and if have installed it and your thoughts? Thanks.